WATERPROOFING PRODUCTS

APPLICATION AREA

• All horizontal and vertical surfaces.
• Terrace, roof and balconies.
• Foundation and curtain insulation.
• Insulation of wet spaces.
• It can be applied on concrete, aerated concrete, brick, screed, zinc, wood, metal, zinc, PVC.
• Repair of old bituminous membranes.
• Chimney and metal gutters.
• In all kinds of reinforced concrete structures with the possibility of cracking.
• For bonding thermal insulation plates.

SPECIFICATIONS

• It has high elasticity. ( %1000)
• It does not contain solvents or harmful substances.
• Moisture and vapor proof.
• It is an ecological product.
• Jointless, seamless coating is done.
• It has high crack covering capacity.
• It is easy to apply because it is a single component, ready to use material.
• High adhesion strength.
• Resistant to plant roots and microorganisms.
• Resistant to freeze-thaw cycle.
• Resistant to chemicals and salt solutions in soil.

APPLICATION AREA

• Insulation of the exterior surfaces of underground and surface structures against moisture, moisture, water and pressurized water.
• Terrace, roof and balcony, basic, curtain retaining walls.
• Insulation of wet spaces.
• Concrete, brick, briquette, light concrete, plaster, screed surfaces.
• On the exterior surfaces of the protected building.
• Wastewater channels on the outer surfaces.

SPECIFICATIONS

• It has high elasticity and crack covering capacity.
• It does not contain solvents or harmful substances, it is ecological.
• Jointless, seamless coating is done.
• High adhesion strength.
• Plant roots and microorganisms are resistant.
• Provides absolute insulation against soil moisture, moisture, water and pressurized water.
• Resistant to chlorine, sulfate, salt solutions, weak acids and substances found in normal soil.
• Resistant to freeze-thaw cycle.

APPLICATION AREA
✔ Concrete, plaster and screed, plastered brick,
✔ Bituminous membrane, bitumen, asphalt, bituminous paper,
✔ Metal, wood, zinc, sheet,
✔ Various plastics (GRP, PVC etc.),
✔ Plastered or primed gas concrete, asbestos cement sheet, cement chipboard and the like.
✔ In the bundling of building foundations,
✔ Waterproofing of curtain walls and retaining walls,

✔ Waterproofing of underground parking pavements,

✔ Waterproofing of terraces, garden-terraces and balconies, inde Waterproofing of concrete, GRP, sheet or zinc roofs
✔ Old bituminous membrane, bitumen, asphalt, bituminous paper
✔ For the repair of insulation underground and on the ground.

FEATURES
✔ Elastic. (1000%)
✔ It forms a seamless and waterproof coating after drying on the applied surfaces .
✔ Does not lose its properties over a wide temperature range (-20 ° C to + 200 ° C) .
✔ UV resistant.
✔ Suitable for use in areas exposed to sunlight, such as terraces, flat roofs and roof creeks .
✔ Suitable for underground use, not affected by microorganisms and aggressive groundwater.
✔Strongly adheres to dry and slightly damp, absorbent and non-absorbent surfaces, and does not separate or swell over time .
✔ It can be used alone for the insulation of curtain walls .
✔ Bituminous membrane, shingle, such as covers and repairs are suitable for use in joints .

APPLICATION AREA

• motorways
• hyperlinks
• Viaducts

APPLICATION AREA

• In wet volumes,
• The pools,
• Water tanks,
• Balconies and parepets,
• Terrace roofs,
• Cold joints in floors and curtains.

SPECIFICATIONS

• Easy to apply.
• Provides continuous insulation.
• UV resistant.
• Resistant to ozone, oils and diesel.

It is a thermoplastic elastomer based dilatation tape which is used for sealing and sealing of building and expansion joints in the ground and wall joints.

APPLICATION AREA

• All kinds of construction joints.
• Tunnel segment joints.
• Shaft and collectors.
• Pipe crossings.
• Prefabricated building joints.
• Cable duct joints.

SPECIFICATIONS

• It is elastic.
• Resistant to tear and abrasion.
• Resistant to chemicals such as oil and oil.
• Resistance to sea water, treatment water, sewage water.
• Does not contain bentonite.
• Resistant to micro-organisms.
• It is used on all horizontal and vertical surfaces.
• It is not affected by freezing and thawing.
• It does not cause corrosion or oxidation.
   

APPLICATION AREA

• Indoor and outdoor horizontal and vertical surfaces.
• Joint fillings of steel, aluminum, metal, copper, stone, plastic, wood, concrete.
• Roof gutters and parapets.
• As an adhesive for joining lightweight elements.
• Industrial floors.
• Between precast wall panels.
• Prefabricated elements in connection details.
• Expansion joints.

SPECIFICATIONS

• It is resistant to water, industrial detergents, hydrocarbon resins and other chemicals. (please consult for list)
• It is antibacterial.
• It has high adhesion.
• Provides permanent waterproofing.
• Long life. (estimated life of 15-25 years)
• Paintable. (with water-based acrylic paint)
• No primer is required.
• It is not affected by weather conditions and expansion movements.

POLYSULFIDE BASED, HIGH PERFORMANCE JOINT FILLING SEAL

.

APPLICATION AREA

• Filling of horizontal joints 
• Industrial floors
• Indoor and outdoor spaces open to vehicle traffic
• Indoor and outdoor areas open to pedestrian traffic
• Very fast application where desired.

SPECIFICATIONS

• Single component.
• It is very easy to apply.
• Excellent adhesion.
• High degree of elasticity.
• It has high mechanical strength.

APPLICATION AREA

• Sprout planting on concrete and stone walls.
• It is used for bonding and assembling all kinds of metal and steel structural elements to concrete.
• Fixing earthquake dampers and railings in bridges and viaducts.
• Fixing anchor elements.
• Adhesion of dilation bands.

FEATURES

• Does not sag.
• Easy to apply, pastry consistency.
• Filling capacity is high.
• Resistant to chemicals.
• Solvent-free.
• Provides excellent adherence to concrete and steel.
• It can be used in horizontal and vertical applications.

APPLICATION AREA

It is used in all kinds of water leakage and leakage, in tunnels, water structures, water pipes, joints, repairs of defects and holes in concrete, filling of tie rod iron cavities, chamfering of corner joints in concrete, door, window edges and non-load bearing elements. . 

SPECIFICATIONS

PLUG provides water impermeability as a permanent part of the applied structure. Adhesion to the surface is high. It hardens by expanding in 2-5 minutes. Insulation coatings can be applied over 15 minutes. It can be applied even in pressurized water streams. It does not crack thanks to its non-shrink feature. Does not contain chlorine. There is no harm to steel reinforcement. It is not toxic. Can be used in drinking water. It does not prevent breathing of the structure to which it is applied. It is used on all horizontal and vertical surfaces. It is not affected by freezing and thawing. Easy to use, only water added

CEMENT AND ACRYLIC POLYMER BASED, TWO COMPONENT, WATERPROOFING MORTAR

In all kinds of reinforced concrete structures with the possibility of cracking;
Water structures, water tanks, water tanks, pools, floors, terraces and balconies, water treatment plants; Bridges and viaducts; In reinforced concrete curtains and walls; waterproofing that may be required before screed and ceramic flooring in kitchens and bathrooms; used on horizontal and vertical surfaces.

SPECIFICATIONS

• FLEXER FULL provides water impermeability as a permanent part of the applied structure.
• Adhesion to the surface is high.
• It is resistant to both positive and negative water pressure.
• It can be applied to interior and exterior facades.
• Makes an elastic coating.
• It doesn’t shrink and crack.
• It is used in structures that are likely to crack, or in structures that still have cracks.
• It increases the resistance of the structure against external factors such as sea water, salt, calcium and oil.
• It does not prevent breathing of the structure to which it is applied.
• Used on horizontal and vertical surfaces.
• It is not affected by freezing and thawing.
• It can be applied on damp surfaces.

APPLICATION AREA

Water structures, water tanks, pools, water treatment plants, dams, canals, harbors, manholes, sewer pipes, concrete pipes, retaining wall, basement wall, foundations, subsoil slabs, construction joints,, grain silos, floor parking lots, roofs, underground car parks.

SPECIFICATIONS

• CRS effectively prevents water progression through crystal formation in water-containing capillary cavities and provides the structure with a life-long water impermeability.
• It prevents the formation of moisture in the structure it is applied.
• Prevents moisture and odor on moldy surfaces.
• It does not lose its reaction ability and the product comes to life with moisture and water leaking into the concrete after years.
• Over time, the concrete will repair capillary cracks that are formed up to 0.5mm.
• It does not block the breathing of concrete and does not cut air and water vapor.
• Provides protection against aggressive chemicals such as chlorine, sulfate.
• The active substance is insoluble and does not separate from the surface.
• It is resistant to both positive and negative water pressure.
• It can be applied to interior and exterior facades.
• It is not affected by ultraviolet rays and oxidation.
• It protects concrete and steel reinforcement from chemicals by increasing the PH value of concrete and prevents corrosion.
• As it is a part of the concrete structure, it does not tear, puncture and age.
• It can be used instead of water holding tape in stationary construction joints. It is used on fresh concrete in waterproofing of horizontal joints.
• Shotcrete is available in applications.
• It is not toxic, it is used in drinking water tanks.

APPLICATION AREA

In indoor and outdoor spaces, horizontal and vertical applications, insulation of balcony and walkable terrace roofs, wet areas such as bathrooms and kitchens, water tanks, cisterns and swimming pools, basic curtain insulation, retaining walls and basement insulation, irrigation channels, manholes and concrete pipes, It is used in the facilities such as hot springs, Turkish baths, and insulating flowerpots.

SPECIFICATIONS

Elastic, does not shrink and crack, UV resistant. Provides safe applications in waterproofing of terrace roofs which will not be covered under light load. Easily applied on horizontal and vertical surfaces by brush, roller, trowel or spraying machine. Provides seamless and jointless waterproofing. Provides high performance water impermeability. Water vapor permeable and allows concrete to breathe. Nontoxic, ideal for drinking water tanks. It forms an excellent insulation layer under ceramic and screed thanks to its flexibility and high adhesion. Protects concrete surfaces from carbonation and chloride.

APPLICATION AREA

• Water tanks, dams, treatment plants, pools.
• Drinking water tanks.
• Foundation concrete, retaining wall, bridges, tunnels and canals.
• Concrete resistant to chemical and environmental effects.
• Mass concretes.
• Precast elements.

SPECIFICATIONS

• Increases resistance to aggressive chemicals in concrete.
• Increases the resistance of concrete against sulfuric acid and sulphate.
• Increases the freeze-thaw resistance of concrete.
• Slows down the corrosion of reinforcement in concrete.
• It has no corrosive effect. Does not harm the equipment.
• Does not contain chlorine.
• Capillary water impermeability effect in concrete is permanent and structural
• Resistant to water pressure up to 14 bar.
• It is resistant to positive and negative water pressure.
• It fills the cracks and capillary gaps that may occur later in the concrete. (max. 400 microns).
• Can be used in drinking water tanks. It is not toxic.
• Increases the early and final compressive strength of concrete.

ANTIFROST is an effective additive accelerator used to protect concrete from frost in concrete casting in cold weather.

APPLICATION AREA

✔ In repair mortars; As adherence in mortars prepared for repairing damaged concrete surfaces and plasters.

✔In plaster mortars; As a contribution to the waterproofing and adherence of all kinds of interior and exterior plasters such as walls and ceilings.

✔ In coating mortars; As an abrasion resistant additive in mortars prepared for laying materials such as natural stone and brick.

✔ In ceramic and mosaic bonding mortars; All kinds of ceramic, mosaic and so on. as adherence enhancer in bonding applications.

✔ As an adhesive between old concrete and fresh concrete; In order to prevent cold joint formation and good adhesion in fresh concrete applications on old concrete.

✔As bonding additive in sprayed concrete; In shotcrete applications, bonding, adherence and adhesion enhancer, insulation additive between old and new shotcrete layers.

SPECIFICATIONS

✔The mechanical strength (pressure, bending, impact, abrasion) of the mortar mixed with QLATEX liquid material increases.

✔Reduces shrinkage and cracking.

✔ Provides impermeability and flexibility.

✔ Increases resistance to freeze-thaw.

✔Not affected by high alkali environments.

✔ It is not corrosive. Does not contain chlorine. There is no harm to the reinforcement.

✔Adherence of mortar to concrete, glass, metal, wood, foam surfaces.

✔It increases the resistance of the structure against chemicals and external factors.

✔ It provides insulation and adherence between layers in shotcrete.
 

APPLICATION AREAS

• High quality concrete with high early strength and low water / cement ratio.
• Production of construction and industrial building elements in the precast industry.
• Production of decorative stones.
• Flooring, columns, beams, bridges, such as structures to remain under early load.
• Chemical resistant concrete production.
• Harbor and underwater concretes.
• In static and dynamic tensile strength concrete.
• Waste water treatment plants.
• Industrial floors.
• Under low temperatures.
• Reduction of steam curing time.
• For concrete casting which requires early formwork.
• Resistant to sulphate and chlorine.

FEATURES

• Low water / cement ratio is obtained.
• Does not contain chlorine.
• Reduces the need for water in concrete. (water throttling 20 – 30%)
• It can be used in all kinds of climatic conditions.
• Especially in cold weather provides high early strength in a short time.
• Makes concrete impermeable.
• Non-decomposable, non-bleeding concrete is obtained.
• Increases resistance to aggressive chemicals in concrete.
• Homogeneous and cohesive concrete is obtained.
• Decreasing time in concrete decreases.
• Reduces or eliminates steam curing time.
• Vibration requirement is reduced.
• It increases the resistance against sulfate and chlorine in concrete.
• It increases the freezing and thawing resistance of concrete.
• Provides shine to the surface in decorative stone production.

APPLICATION AREA

• All kinds of mortars.
• Indoor and outdoor.
• Swimming pool, water tanks.
• Tunnel and water canals.
• in the walls.
• Terraces.
• In basements and galleries

SPECIFICATIONS

• Provides water impermeability.
• It does not affect the setting time of the mortar.
• Increases the workability of the mortar.
• Ready to use and practical.
• It is economical.
• It increases the freeze-thaw resistance of the plaster.
• Does not contain chlorine.
• Funding does not prevent to breathe.

APPLICATION AREAS 
✔ On all cement based screed, plaster, exposed concrete, slab,
✔ Usually in ceramic and under screed applications,
✔Used on all surfaces where UV resistance is not desired.

FEATURES
✔ Single component and easy to apply.
✔ Adhesion to cement based surfaces is high.
✔ Prevents carbonization on concrete surface.
✔ Creates a jointless and seamless coating.
✔ Provides impermeability.
✔As it is elastic, it covers the micro cracks in the structure.
✔Does not prevent the passage of steam.
✔Provides a good view in terms of decoration.
✔Prevents the corrosion of the reinforcement.
✔ Resistant to freeze-thaw.
✔Can be applied on horizontal and vertical surfaces.
✔Harmless and non-flammable. Solvent-free.

APPLICATION AREAS

It is used in the insulation of terrace roofs and balconies, on exterior walls, roofs, wooden surfaces, on bituminous insulated bituminous insulations made of old, asphalt and concrete floors.

SPECIFICATIONS

Single component, easy to apply. It can be applied on horizontal and vertical surfaces. It forms a jointless and seamless coating. Provides 100% waterproofing. UV resistant. High elasticity. Hygienic, does not contain carcinogens. It can be produced in different colors. It is open to light pedestrian traffic.

APPLICATION AREAS 

• It can be applied to the walls and ceilings of the buildings;
• The special additives are cured with moisture and applied on slightly wet and damp surfaces;
• It is used especially in cottages, warehouses and basements, in humid and alkaline environments such as tunnels, cellars and cellars.

FEATURES

• It can be easily applied on all kinds of damp surfaces in the interior;
• Preserves its whiteness because it does not contain oil and alkyd, it does not turn yellow. Blocks
  moisture and moisture from the wall and prevents mold and bacteria growth;
• Fast drying;
• Very high alkali resistance;
• Excellent adhesion to the surface without primer;
• It is especially suitable for the solution of damage and spillage problems caused by moisture and humidity at the level of flooding;
• The painted area can be used shortly after application since it does not have any unpleasant odor.

APPLICATION AREAS

• Terraces,
• Patio and balconies
• Concrete, natural stone surfaces,
• Glass surfaces,
• Ceramic surfaces,

FEATURES

• It has excellent mechanical properties.
• High UV resistance.
• Excellent resistance to bad weather conditions.
• Easy to apply (with roller or airless spray).
• Since it is a pure polyurethane, it can be in constant contact with water.
• Maintains its mechanical properties at temperatures between -40 ° C and +80 ° C.
• Its adhesion is very strong.
• It has alkali and chemical resistance and retains its transparency and elasticity even after many years.

APPLICATION AREAS

• All kinds of plastered, painted and unpainted interior and exterior surfaces, concrete, wood and steel structures, roofs, fire escapes,  
• In all places where flammability rule is required,  
• School, nursery, hospital, theater and cinema halls,  
• Drywall walls and ceilings, chimneys,  
• Thermal power plants and industrial buildings, factories,  
• Used in military facilities.

SPECIFICATIONS

• Fire retardant.  
• Water-based, solvent-free.  
• Elastic, not affected by movements.  
• Can be applied on dry or damp surface.  
• Water impermeable and water vapor permeable, does not prevent the surface from breathing.  
• Does not hold dirt.   
• It dries quickly.  
• It does not contain carcinogenic substances.  
• Available in all colors.

BRAC is a chlorine rubber based, high abrasion matt paint used for road and pavement markings.

HIGH PERFORMANCE REPAIR MORTAR WITH FIBER EQUIPMENT, THIXOTROPIC THICKNESS (2 – 50 MM)

APPLICATION AREAS

• Sprout planting on concrete and stone walls.
• It is used for bonding and assembling all kinds of metal and steel structural elements to concrete.
• Fixing earthquake dampers and railings in bridges and viaducts.
• Fixing anchor elements.
• Adhesion of dilation bands.

FEATURES

• Does not sag.
• Easy to apply, pastry consistency.
• Filling capacity is high.
• Resistant to chemicals.
• Solvent-free.
• It provides excellent adherence to concrete and steel.
• It can be used in horizontal and vertical applications.

APPLICATION AREAS

In light and heavy machinery basic fillings, bearing, grouting and assembly works, generators, diesel engines, printing machines, compressors, cranes, weighing machines, pumps, marble cutting machines, crushers, gas and steam turbines, column and plastic beam assembly, It is used for fixing steel columns to the foundation, manufacturing curtain and column heads, assembling prefabricated concrete building elements.

SPECIFICATIONS

• Resistant to chemicals such as oil, chlorine, sulfate.
• Resistant to impact, vibration, static-dynamic-thermal pressure.
• Impermeable.
• Does not shrink. (Non-shrinkable)
• Freeze-thaw resistant.
• It has high bonding strength to concrete and steel reinforcement.

Qpeg Chemical Anchor Anchor is a two-component, paste-based, polyester-based anchor and mounting resin. (chemical dowel)

KORUNT is a wear-resistant, powder-hardener that is monolithic applied to fresh concrete surfaces, consisting of a mixture of special type cement, high quality corrugated aggregate and performance-enhancing chemical additives.

APPLICATION AREAS

It is used as floor covering material on concrete and cement based surfaces, warehouses, production areas, shopping malls, hangars, exhibition and exhibition areas, parking lots.

SPECIFICATIONS

It has high mechanical strength. It can be applied to sandy or uneven surfaces due to its self-spreading feature. High abrasion resistance. Easy to apply. It forms an impermeable layer against liquids. 

APPLICATION AREAS

It is used as a topcoat on concrete and cement based surfaces, in warehouses, production areas, shopping centers, hangars, exhibition and exhibition areas, parking lots.

SPECIFICATIONS

It has high mechanical strength. It is liquid impermeable. Glossy finish. Easy to apply. Easy to clean and maintain. An anti-slip surface can be obtained. 

FLOOR EP TXT is a two-component, easy-to-clean thixotropic topcoat designed for industrial floors with an easy-to-apply orange peel surface.

FLOOR EP GUARD is a two component, solvent free, epoxy based, protective coating material. When cured,  FLOOR EP GUARD forms a hard and glossy film with high abrasion resistance and chemical resistance.

AK 70 is a water based, acrylic resin based curing liquid.

DESCRIPTION

QIS PUSHER is used to cure the concrete after all fresh concrete and concrete surface hardener applications and to prevent dusting by obtaining an insulated layer in the concrete. If desired, it is applied on old concrete to increase the performance of concrete surface and dusting is prevented. At the same time, a bright appearance is obtained on the surface. QIS PUSHER is a solvent based acrylic resin based, transparent liquid. When applied, it forms an insulated layer on concrete and prevents rapid evaporation of water in concrete. Applied material also provides a transparent and protective film layer provides insulation, prevents dusting of the surface increases the durability of concrete.

APPLICATION AREAS

It is used as a curing and polishing agent on all vertical and horizontal concrete surfaces, industrial floors, reinforced concrete floors, parking lots, storage floors, printed concrete systems.

SPECIFICATIONS

The strength of a concrete cured with QIS PUSHER increases by 20-25% compared to normal concrete. Prevents cracks in concrete during curing. Prevents dusting on concrete surface. Increases abrasion resistance of concrete. Does not change color on the surface. Multi-purpose. It is prevented from dusting by curing and insulation with the film layer obtained in the concrete and its permanence is increased by protecting the concrete surface. It provides good adhesion with the bonding materials of the coatings to be applied later on the surface. Used indoors and outdoors. UV resistant. Water repellent. Provides impermeability. It increases the resistance of concrete against chlorine. One or more coats can be applied to the hardened-old concrete surface at regular intervals to maintain the concrete strength continuously, to prevent dusting and to obtain gloss on the surface.

APPLICATION AREAS

• Ready-mixed concrete plants.
• Concrete trucks.
• Concrete and screed pumps
• Sewage – waste water pipes
• During and after the construction of ceramic, natural stone, granite, porcelain coating materials such as waste and residues on the removal of waste and

SPECIFICATIONS

• It does not corrode the inner and outer surfaces of the surface it is used on and does not change its appearance.
• It removes rust and dirt and concrete residues.

MOLDEX SKL 400 is used to facilitate the separation of molds from concrete on all kinds of absorbent mold surfaces, to provide easy and quick removal of molds and to clean and to obtain a smooth concrete surface.

MOLDEX PC KAY is a special mixture prepared with high quality mineral oil and chemicals. It is used to facilitate the separation of steel molds from concrete, to provide easy and quick removal of molds and to obtain a smooth concrete surface.

Transparent, one component, polyurethane primer material.

APPLICATION AREAS

• As a primer for epoxy, polyurethane based coatings.
• As structural adhesive for bonding.
• Anchoring.

SPECIFICATIONS

• High mechanical strength.
• Does not pull. (Non-shrink)
• Solvent-free.
• Can be used indoors and outdoors.
• Can also be used in humid environments.
• It has high and structural bonding strength.
• It provides impermeability in the structure to which it is applied.
• Resistant to chemicals such as petroleum, oil, acid and alkali.
• It can be applied on concrete, wood, steel and stone surfaces.

APPLICATION AREAS

• For indoor ceilings and vertical surfaces.
• For better adhesion of gypsum, lime and cement based plasters to concrete surfaces .
• As a primer for ceiling plasters.
• Qcontact is not suitable for use in high humidity environments such as pools and bathrooms , rough plasters and exterior surfaces

PROPERTIES

• Improves working time and workability of gypsum and cement based plasters .
• Prevents rapid water loss of gypsum and cement based plasters.
• Solvent-free. Odorless.

SEREX is an acrylic polymer dispersion based primer that improves the adhesion of coatings on flat, glossy and glassy surfaces.

PU PRIMER EX is a one-component material used as a primer to increase the adhesion of coatings on non-absorbent flat and glossy surfaces.